These units are primarily for lifting or Lowering Masses in both Vertical & Horizontal planes. The Mass that can be Lifted is from 250 kg (0.25 Tons) to 150000 kgs. (150 Tons through various Frames of 0.25T/0.5T/1T/2T/2.5T/ 5T/ 10T/20T/ 25T/30T/35T/50T/100T/150T (T- indicates Metric Tonnage. These units give positive mechanical action, fail proof & Precise Positioning. The Height that can be lifted (or) lowered is upto 3000MM. There are Two standard speeds available viz., Normal lift & Slow lift. Housing / Shell is made of Steel Casting from 5 Ton & above.

There are two types viz.

1. Lifting screw rod (Translating Screw)
2. Rotating Screw rod and moving NUT with two Further design possibilities of
    Design A (upward movement) Design (B) Downward movement. These Jacks can be used on
    sideways (or) angular ways also.
3. For Translating Screw Rods keyed version is available as special version.

Functions Accomplished

Elevating, Lowering, Pulling, Pressing, Pushing, Positioning

Advantages

Horizontal, Vertical, or Angular Mounting
Uniform Traverse /Positive Mechanical action
Precise Positioning /Safety & Clean environment
Multiple Jacks in Combination/ Manual or Auto Driven
Uneven Loads are uniformly distributed with proper Synchronization.